SanDisk (サンディスク) SDDR-01 ドライバ ダウンロード 無料 (ver. 2.­03)

SDDR-01 Drivers Windows 95 /­ 98 driver installation note Click on the "Start" button found at the bottom left hand corner of the main screen.­ From the menu displayed,­ click on "Settings" and then click on the "Control Panel" option.­ Double-click on the "Add New Hardware" icon in the Control Panel group.­ The "Add New Hardware Wizard Window" is displayed,­ click the "Next>" button.­ A prompt to search Plug &­ Play devices is displayed,­ click "Next>" to continue.­ Then choose "NO" to "Do you want Windows to search for your new hardware?­" and click "Next>" to continue.­ Choose "SCSI Controllers" from the list of Hardware types displayed and click the "Next>" button.­ Click on the "Have Disk" button.­ Insert the driver diskette into the floppy drive and click "OK" button.­ At this point,­ the SanDisk adapter(s) are displayed.­ Choose the appropriate adapter type.­ Click on "Next>" button and then the "Finish" button.­ The driver is copied to your system,­ and added to the installed device list.­ This may take a few seconds,­ so standby until the screen changes.­ (Clicking on "Finish" more than once may result in adding the hardware more than once,­ so don't do it.­) Windows ME driver installation note Click on the ME driver that you want to download.­ Write down the of the name of the file and where this file is going to be saved on your hard drive.­ After downloading the file,­ go to the location it was saved in.­ Double click on the file and follow the instructions on the screen.­ DO NOT change anything.­ Click finish at the end of the install.­ Plug in the ImageMate.­ It will create a new drive in My Computer.­ Windows NT 4.­0 driver installation note Click on the "Start" button on the desktop.­ Click on Settings and then open the Control Panel folder.­ Click on the SCSI Adapters icon in the Control Panel.­ Select the Tab for the "Driver" options.­ From the Window display,­ click the Add button.­ Click on Have disk button.­ Insert the driver diskette and or/­provide the location of the drivers and click "OK" button.­ Choose the appropriate adapter type.­ Click "OK" button.­ The driver is copied to your system and added to the installed device list.­ This completes the driver installation.­ Restart the computer as prompted by NT for the driver to take effect.­ Windows 2000 driver installation note With the PC turned off,­ first connect the parallel port reader.­ Boot Windows2000.­ The OS should automatically find the new hardware and run the installation wizard.­ Provide the location of the EPCFW2K.­inf and EPCFW2K.­SYS files.­ The driver files will now be copied and the system may timeout for a brief period until the driver loading process has completed.­ After all hardware sub-devices have been detected and installed,­ then the media will be accessible via Explorer as a removable drive.­ End of Installation.­